Remodeling a home is such a g project to complete. It is quite a complicated mess to deal with lots of tasks to do such as installation of the new equipment along with demolition because it leaves behind tons and tons of scrap. Among all these things to do- from finding a good contractor to selecting materials and paying attention to other things like costs- it becomes very easy to forget about the cleaning of your home, states the experts at the best Dallas flooring companies.
If you are looking for tips to prevent dirt and mess and to clean it post remodeling or construction then here are the right tricks for you.
Have enough garbage bags before you start the process:
When you decide on the process of cleaning, it is important to have enough garbage bags so that you don’t find any kind of difficulty later on. Though this does not seem important this will make a huge difference in the entire cleaning process. You should pick those garbage bags which are thick and can endure the weight of the construction scrap because you know that construction scarp is very heavy.
Vacuum the carpeted floor and furniture:
No matter how properly you have covered the floor and furniture, debris easily manages to embed itself on carpeted floors and soft furnishings. If dust particles are allowed to be settled after renovation then your house can look filthy and also dirt particles can cause irritation or rashes. You need to properly vacuum the carpeted flooring and soft furniture items. Get the cushions of your sofa, take them out, and beat them to get rid of dust. Just see to it that no residue of dust is left behind.
Get the hard surfaces cleaned:
It is necessary to wipe the hard surfaces. The walls and ceiling of your house can also collect dust particles during the remodeling. When removing the dust from walls or ceiling go for dry cleaning because you do not want to damage the newly plastered surface. For a non-abrasive cleaning option Dry ice cleaning services are a highly effective cleaning method that will significantly reduce cleaning time and leave you with a fresh, clean slate to work with.
Clean and polish the furnishings:
Do not forget to clean the cabinet’s interior shelves and the hard-to-reach corners. Get rid of debris from the countertops, bookshelves, windowsills, frames of the doors and windows, doorknobs, the handle of the doors, and any other flat surfaces or hard furnishings by wiping them off with the help of a clean piece of cloth. Make sure to vacuum the bathroom as well to give clean look to your space. Mop the floor from wall to wall to give fine polishing to the flooring.
Make the ventilation system dust-free:
When your space is being remodeled then it is definite for dust particles to mingle in the air and to find their way into the air vents. Get the air vents, as well as air filters, clean immediately to stop the flow of dust particles through the air ducts. Take the vent covers off and clean them thoroughly with the help of soap and water. Make sure to dry them properly before putting them back into their place. If you find any exposed air filters then do replace them with fresh ones. It can be dangerous to breathe in dusty air because it causes various respiratory problems.
Don’t forget to clean the walls:
After completion of the renovation project, a lot of dust gets retained on the walls of the house. Dry dusting could be a good solution to get rid of this dirt and to keep your walls the same as they were before. Using a vacuum cleaner could also be very helpful.
The process that is used for cleaning:
The huge cleaning task is divided into three main parts and these are rough cleaning, dry/initial cleaning, and finishing cleaning. Let us get to know about these in detail so that you can easily clean your home.
Rough cleaning:
Rough cleaning is done immediately once the project is completed. In this process, all the largely accumulated debris, large pieces of leftover items, or materials have been disposed of in a good manner. It also includes the things like removal of labels or anything else that is usually present on the recently installed items. You should also use the vacuum cleaner to clean up the entire space.
Initial cleaning:
The initial cleaning is the stage of cleaning which requires most of the hard work and this is the phase when deep cleaning of all the equipment has been done. Some of the parts of any home require more cleaning like kitchen, bathroom, and toilets and so on and the equipment installed in these places requires a lot of hard work. This is the most crucial step of cleaning and most of the cleaning parts are finished during this step.
Final clean up:
You have completed most of the cleaning in the initial or light cleaning. Now, all you have to do is just give the shine to the cleaning you have done. This step is important to clean up the leftover dirt particles or anything else that is left over during the above two steps. Vacuuming the entire surface is an ideal option to remove any leftover dirt or dust.
Hope this offers you a clear understanding of what needs to cleaned and how, post the renovation project. Renovation is a crucial way to elevate your standard of living by tweaking your home for the best. Try new ideas of renovation, just do not forget to efficiently clean after the project is over.
