Most gun enthusiasts have a basic understanding of how to build a Glock. The number one challenge for every new Glock builder is obtaining the correct parts and tools. Fortunately, many resources are available to make this process much more convenient and less time-consuming. Buy a Glock 80 from 80% Arms to complete a gun in the comfort of your own home. Following is a complete guide on challenges and how to overcome them while building a personalized Glock.
What Is the Correct Tool Set for a Glock?
The correct tools for a Glock are hand tools, jigging pins, lathe, socket wrenches, high-speed wrenches, various screwdrivers (both old and new), a universal joint, and a bench vise. Hand tools include a mallet, hammer, chisel, and an appropriate drill.
Building Your First Glock: The Fundamentals
The fundamentals of Glock build are the same for all models, so there is no need to re-invent the wheel. The barrel is the most crucial component of a Glock. Its length is determined by several factors, including the shooter’s intended application and the level of protection desired.
Building Your First Glock: Step by Step
After you understand the basics of how a Glock is built, it is time to go more in-depth. The first step in building a Glock is to acquire a basic understanding of how the parts fit together. In the case of a Glock, this is referred to as “jigging” the gun.
The next step is to remove excess material from the barrel and slide. This is known as cutting away the “collar.” It is essential to ensure proper assembly to maximize reliability and prevent future issues.
The trigger unit is the heart of a Glock. It is the part that fires the cartridge, ignites the propellant, and withdraws the spent casing. It is made up of the trigger assembly, sear, and hammer. They need to be perfectly installed for accurate performance.
Common Mistakes
One of the biggest challenges for new gun enthusiasts is acquiring the correct tools and parts. However, they can get an 80% Glock lower, which is easy to assemble and comes with a menu. Another common mistake while building a Glock is not working on the barrel. The gun barrel dictates the bullet’s trajectory and speed. Not polishing the insides will affect the bullet’s trajectory and might not be fired straight. Finally, not using a jig to make holes can be tiresome when connecting the trigger and slider. However, if using an 80% lower and drilling holes using a jig is all you need to overcome this issue.
If you are interested in building a Glock, you should be familiar with the basic parts and components of the gun. Numerous resources available online and at local gun shops can help you acquire the necessary parts and tools. Remember, building a Glock requires patience and proper tools; otherwise, the final product will not be up to your expectations.
