You know plumbing problems can spoil your day and it can happen at home or even at work. That drip, drip, drip, drip, or slowly dripping toilet, is not only inconvenient, it is resource and money waste. The upside? Most of these typical headaches are astonishingly simple and inexpensive to fix internally, and sometimes with simple equipment and slight downtime.
The cheapness of resolving minor problems with plumbing is not the only thing to consider, and as such, it is helpful in ensuring that more serious (and expensive) problems are prevented in the future. The self-empowerment of practical affordable plumbing solutions saves on time and money. Naturally, there are cases, when professionalism cannot be negotiated like major leaks, repetitive problems, or sewage needs a licensed plumber. In this instance, the well-established Miami plumbing partners such as Oasis Plumbing Services. They are reputed to offer fast and professional service coupled with reliable results across the area.
Common Plumbing Problems and Solutions
Dripping Faucets
Even one leaky faucet can use lots of water in the long run, which is a waste of money on your utility bill. The crook is a worn-out washer or O-ring.
Solution: Shut off the water supply beneath the sink. Use screwdriver to disassemble handle, then change the old washer or O-ring, and reassemble. Turn the water on again and the issue must be sorted out.
Clogged Drains
Slow or blocked drainage is a common problem in kitchen and bathroom. A plunger will frequently suffice, but a little extra effort can help at times.
Solutions:
- In the case of Sinks: Add 1/2 cup baking soda and then 1/2 cup vinegar down the drain. Allow to rest (preferably overnight) then wash with hot water. This assists in dissolving small blockages.
- On difficult clogs: Tougher clogs can be loosened and removed using a manual drain snake, which can be bought at hardware stores.

Running Toilets
One of the largest contributors to wasted water is a toilet which runs continuously, most commonly through a faulty flapper valve or fill valve.
Solution: Open the tank and check the flapper whether it is wearing or not sealed with the proper sealing. Amend or substitute as required. Check also the chain connecting to the flush lever, tangles or wrong length. Should the trouble continue, you can replace the fill valve.
Low Water Pressure
When faucets or showers are only giving off a drip, the reason is usually a clogged aerator.
Solution: Unscrew on the end of the faucet or showerhead, put in vinegar to loosen the mineral deposits, scrub it with a brush and put in place again. Keep the shut-off valves all open, too.
When to Contact a Professional
Rather than pondering on the reasons your shower water runs cold quickly even when your water heater is working, or why your pipes keep bursting, or why the sewage backs up often, it is best to call a plumber. Don’t risk making things worse or getting hurt by trying to fix stuff that’s beyond your skills.
In conclusion, if you have the knowledge and few tools, you can deal with small plumbing problems quickly and economically. However, for complicated issues never hesitate to call your local plumbers. It ensures peace of mind that your plumbing dilemma will get fixed safely and efficiently.
